Shipping Weight: 18.5kg (40.79Ib) [packed]
Electrical: 220/240 Volts - 1100 Watts - 5 Amps - 50 Hz

* Based on 24 hours of continuous operation under ideal conditions. Actual production may vary.

• Trouble free float system
• Seal protected switching
• Highly efficient, stainless steel finned coil
• Large 5" boiling and storage tank opening
• ½" impurities drain
• Stainless steel post charcoal filter.

After filling manually, the distiller will distil about 4 litres of pure water, then it automatically shuts itself off.

Designed with the largest lid opening in the industry and a 'V' bottom boiler, your distiller is easier to maintain. The Precision 30LSS Distiller has exceptionally high quality power and fan switches, as well as a float switch that shuts the distiller off when the water level is low.

Tap water is heated up and brought to a boil and the pure steam rises. The steam enters a baffle system that directs the steam towards the cooling coil. As the steam enters the cooling coil, a gas vent releases any volatile gases from the coil.

Your Precision 30LSS is one of the most advanced water distillers on the market today. It is designed with many user-friendly features:

Model 30LPC (below) - RRP AUS$1,380

(1) Tap water is poured into the top of the distiller and filled to the water level pin.

(2) The heating element heats the water and brings it to a boil.

(3) As the steam leaves the boiler, it is channelled through a full length baffle system. It then goes past a gas release vent and enters the cooling coil to be cooled into pure steam distilled water.

(4) As the water exits the cooling coil, it goes through a post carbon filter and into your storage container or optional storage tank.

When finished the unit simply turns itself off automatically.